The Ford Barn - View Single Post - The Terry Burtz 5 main bearing engine blocks are back on track.

Synchro909 · 05-26-2021, 08:50 PM

The blocks were cast and machined in China. If you follow the development of this engine and Todd Buttermore's (?) efforts, you will see that they have tried to have it done in the US but couldn't get a foundry competent enough to cast the blocks while the Chinese were all over it.
Heaven help us all if a war were to break out

05-26-2021, 08:50 PM	#334
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,497	Re: The Terry Burtz 5 main bearing engine blocks are back on track. The blocks were cast and machined in China. If you follow the development of this engine and Todd Buttermore's (?) efforts, you will see that they have tried to have it done in the US but couldn't get a foundry competent enough to cast the blocks while the Chinese were all over it. Heaven help us all if a war were to break out __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.