Re: The Terry Burtz 5 main bearing engine blocks are back on track.
Rick,
no source I have seen for the cam driven pump assy, I have made a few but gets pretty expensive.
Pumps are easy, Aviad, Barnes, Dailey, too many to list.
I haven't put much thought into the drive mechanism, hmm, maybe.
Stock drive, I don't know what is too much. I run about 30 hot/cold.
FWIW, the Model "B" motor did not run pressure, the oil galley has a pretty big hole to dump the excess oil out.
J
__________________
As Carroll Smith wrote; All Failures are Human in Origin.
Last edited by johnneilson; 04-05-2021 at 09:40 PM.
Reason: addition
|