The Ford Barn - View Single Post - The Terry Burtz 5 main bearing engine blocks are back on track.

hardtimes · 04-04-2021, 03:12 AM

Fit/ finish.....Burtz engine

Today I made a trial installation of a ‘28 5 bearing cam... into the 5 cam bearing Burtz block.
IT FIT TIGHT AND RIGHT, into the already installed cam bearings.
A great feeling when buying equipment that works as sold new.
Thanks Terry

Q: Terry... Im thinking of buying Using same alum oil pump (Stipe).. in your new engine kit.
Does the ‘DOG’ clamp work with Stipe oil pump ?
Any plumbing methods/tips used with that pump will help. Thanks.

04-04-2021, 03:12 AM	#292
hardtimes Senior Member Join Date: May 2010 Location: South California Posts: 6,188	Re: The Terry Burtz 5 main bearing engine blocks are back on track. Fit/ finish.....Burtz engine Today I made a trial installation of a ‘28 5 bearing cam... into the 5 cam bearing Burtz block. IT FIT TIGHT AND RIGHT, into the already installed cam bearings. A great feeling when buying equipment that works as sold new. Thanks Terry Q: Terry... Im thinking of buying Using same alum oil pump (Stipe).. in your new engine kit. Does the ‘DOG’ clamp work with Stipe oil pump ? Any plumbing methods/tips used with that pump will help. Thanks.