The Ford Barn - View Single Post - The Terry Burtz 5 main bearing engine blocks are back on track.

johnneilson · 07-22-2019, 09:15 PM

Chris,

can you elaborate on the build some?
1. repairs to make block sound, stitching, seats, sleeves etc.
2. "A" or "B" block
3. original cost of block, crank, rods, pistons etc.
4. what else, flywheel lightening? clutch change? cam, change or regrind?

Also, if "B" block, which main bearings were installed?

Thanks, John

07-22-2019, 09:15 PM	#52
johnneilson Senior Member Join Date: Jun 2010 Location: 34.22 N 118.36 W Posts: 1,057	Re: The Terry Burtz 5 main bearing engine blocks are back on track. Chris, can you elaborate on the build some? 1. repairs to make block sound, stitching, seats, sleeves etc. 2. "A" or "B" block 3. original cost of block, crank, rods, pistons etc. 4. what else, flywheel lightening? clutch change? cam, change or regrind? Also, if "B" block, which main bearings were installed? Thanks, John __________________ As Carroll Smith wrote; All Failures are Human in Origin.