Thread: didn't use Permatex Thread Sealant when installing heads
View Single Post
Old 01-17-2019, 09:23 PM   #30
Jack E/NJ
Senior Member
 
Jack E/NJ's Avatar
 
Join Date: May 2010
Posts: 2,173
Default Re: didn't use Permatex Thread Sealant when installing heads
>>>grease is very fluid.>>>

Nope. Doesn't flow too good either. Stays packed in wheel bearings that are flinging around pretty fast, sometimes pretty hot too. Jack E/NJ
Jack E/NJ is offline   Reply With Quote