View Single Post
Old 12-02-2019, 08:34 PM   #3
Senior Member
Vanspeed's Avatar
Join Date: May 2010
Location: Waterford, Mich.
Posts: 3,083
Default Re: Light switch rod and steering box need help

I did some reading and it seems that end plates that had the steel tube are for 1940 and up because only the horn wire passed through. It seems that the plates that had a horn rod go through them had brass tubes? Also the brass tube was a bigger diameter to allow the horn rod to pass through. Any of this sound right?
Respecting and Resurrecting Ford Model A's.
Vanspeed is offline   Reply With Quote