The Ford Barn - View Single Post

Bob C · 11-05-2018, 01:51 PM

I haven't had much luck with the Rust 911 once it turns black. On the derusted parts
I wire buff them and then wipe them down with lacquer thinner or degreaser and
then primer.

11-05-2018, 01:51 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,741	Re: Rust 911 or evaporust I haven't had much luck with the Rust 911 once it turns black. On the derusted parts I wire buff them and then wipe them down with lacquer thinner or degreaser and then primer.