The Ford Barn - View Single Post - 56 T-bird rebuild

Yotehunter66 · 10-18-2018, 08:07 AM

All I know is when I took it apart I made it a point to set the timing mark on the balancer at what I thought was TDC and then just looked to see where the rotor was in relation to that and it was pointing at #1 but apparently that has nothing to do with the setting of the marks of the cam and crank. I'll roll crank gear over to where it should be by the pics and diagrams and see where the cam is then.

10-18-2018, 08:07 AM	#47
Yotehunter66 Member Join Date: Sep 2018 Location: Clayton, Michigan Posts: 48	Re: 56 T-bird rebuild All I know is when I took it apart I made it a point to set the timing mark on the balancer at what I thought was TDC and then just looked to see where the rotor was in relation to that and it was pointing at #1 but apparently that has nothing to do with the setting of the marks of the cam and crank. I'll roll crank gear over to where it should be by the pics and diagrams and see where the cam is then.