The Ford Barn - View Single Post - How do you get front wheels straight before setting Toe-In

jwilliams81 · 09-24-2018, 04:26 PM

I was thinking about removing the tie-rod. Eye balling both wheels straight.

Then screw in each side of the tie-rod in equally while still off the car... until the bar ends are close to lining up with the steering arm balls.

Then reattach the tie-rod and go to town setting the toe-in.

09-24-2018, 04:26 PM	#5
jwilliams81 Senior Member Join Date: Sep 2016 Location: Cincinnati OH Posts: 418	Re: How do you get front wheels straight before setting Toe-In I was thinking about removing the tie-rod. Eye balling both wheels straight. Then screw in each side of the tie-rod in equally while still off the car... until the bar ends are close to lining up with the steering arm balls. Then reattach the tie-rod and go to town setting the toe-in. __________________ 1931 Murray Town Sedan. Black body with Apple Green pin stripe. 1923 Model T Touring with electric start. Low radiator Cincinnati, Ohio