Quote:
Originally Posted by Dewshan
Yes all valves are moving... compression test had it in 50s all cylinders but it wasnt super accurate my tester not the best for large spark plug holes. Was just checking for compression. I dont think this engine was broken in much after rebuild. New coil, changed condenser, have looked at it running in the dark and did not see arcing. In tdc on the timing gear i can not get a feeler gauge in either valve on cyl 4. Is this the problem?
|
Yes, are you sure the lifter is on the heal of the cam lobe?
It may not be what is causing your problem right now but when the car gets
out on the road and the engine heats up you can burn a valve.