View Single Post
Old 03-27-2016, 07:27 AM   #10
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Which wiring harness - 1929 CCPU

Quote:
Originally Posted by 1955cj5 View Post
Here is a picture of my light switch handle....it has one position to the left for parking lights, and two to the right, low and high beam.

Also a picture of my 7 tooth steering box,

And finally the headlight reflector..

I have been trying to sort my headlights since I first got the truck last spring..I had a mix of 28 single bulb buckets and two bulb reflectors and harness....

Take it slow, as previously advised!!
I don't know how you sorted out the headlamps, but I would go with what it should have for the time period. No "TWOLITE" on the buckets until February 1929, and they would have the single bulb reflectors. After that they would have the TWOLITE on the buckets and have a 2 socket reflector, or have cowl lights and a single bulb reflector. And pickups and AA's would have painted buckets, except for a deluxe version.

Also the 1928-early 29 would have the early headlamp switch with high, low, and off positions only.
Tom Wesenberg is offline   Reply With Quote