The Ford Barn - View Single Post

rotorwrench · 06-20-2020, 08:32 AM

Some folks use the spring tube types or trammel bars but some still just use a tape measure. The key is measuring at the same height off the floor on both the front and the rear and also the same place on the tires. Any method will get into the ball park as long as the wheels are true & bearings are tight.

Most of the toe gages are less than 100 bucks plus shipping so they don't break the bank.

06-20-2020, 08:32 AM	#16
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,422	Re: Radial tires again Some folks use the spring tube types or trammel bars but some still just use a tape measure. The key is measuring at the same height off the floor on both the front and the rear and also the same place on the tires. Any method will get into the ball park as long as the wheels are true & bearings are tight. Most of the toe gages are less than 100 bucks plus shipping so they don't break the bank.