The Ford Barn - View Single Post

Pete · 07-06-2013, 02:08 PM

If it won't clean up at the standard oversize it can be sleeved back to standard.
This is far better than replacing the axle with a used one. You are not going to find a used one that is not worn also.
Most machine shops that specialize in truck stuff can sleeve an axle.

07-06-2013, 02:08 PM	#3
Pete Senior Member Join Date: May 2010 Location: Wa. Posts: 5,407	Re: King pin diameter If it won't clean up at the standard oversize it can be sleeved back to standard. This is far better than replacing the axle with a used one. You are not going to find a used one that is not worn also. Most machine shops that specialize in truck stuff can sleeve an axle.