View Single Post
Old 11-09-2019, 12:44 AM   #9
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,471
Default Re: Valve adjustment sequence

Quote:
Originally Posted by Werner View Post
Hallo Synchro,
if you increase the valve clearance, the valves will open slightly later and close a little earlier. As a result, the cylinder filling is a little less and the power drops.
Yes, Werner, I'm aware of that but power is lost also if the valves are not properly closing.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote