Quote:
Originally Posted by CarlG
You need to be careful putting a threaded bolt in that hole. Those are pipe threads and can be screwed up very easily. The vendors sell a couple different styles of a tool that is used just for that purpose. Pictured below is one that Snyder's sells. Just add this to your next order, it's only $6, you can't make one for that.
|
That's exactly what I was thinking of. And you're right; for $6 why try to make one. Thanks for posting that.
BTW. I used a bolt that wouldn't actually thread in. It was a smaller diameter but large enough to be stable enough to hold the pump.