The Ford Barn - View Single Post

Joe K · 01-13-2014, 06:43 AM

Brent is correct. I use TWO screwdrivers. One in the left hand to "stake" the tapered end of ring and the other in my right hand to pry out the "reverse taper" end from the groove.

I did this while sitting on the floor with the hub pinched between my legs.

Wear eye protection and stout jeans!

Joe K

01-13-2014, 06:43 AM	#3
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,188	Re: Snap rings Brent is correct. I use TWO screwdrivers. One in the left hand to "stake" the tapered end of ring and the other in my right hand to pry out the "reverse taper" end from the groove. I did this while sitting on the floor with the hub pinched between my legs. Wear eye protection and stout jeans! Joe K __________________ Shudda kept the horse.