View Single Post
Old 06-25-2014, 07:43 PM   #8
jbrittonjr
Junior Member
 
jbrittonjr's Avatar
 
Join Date: Dec 2010
Location: Whiting, NJ
Posts: 23
Default Re: Verifying charging system on 6V Alternator system

I think you want around 7 volts from the alternator to charge the battery. If your meter is going "crazy" when you check for direct current voltage perhaps your alternator has a bad diode, regulator, or you have a grounding problem. Try checking for alternating current from the alternator. In this case, AC bad, DC good.
jbrittonjr is offline   Reply With Quote