The Ford Barn - View Single Post

dduke · 03-05-2012, 10:34 AM

Not all intakes are created equal. I ran a super dual with a pair of Holley 94's that had a fitting and tube that went back to the breather/oil fill tube at the rear of the intake. My current offy and single quad is set up a bit different and the breather at the rear is fine. I use the fitting at the rear of the intake below the carb as my vacuum and trani set-up.

03-05-2012, 10:34 AM	#7
dduke Junior Member Join Date: Feb 2011 Location: Binghamton NY Posts: 5	Re: Ventilating the Flat Head! Not all intakes are created equal. I ran a super dual with a pair of Holley 94's that had a fitting and tube that went back to the breather/oil fill tube at the rear of the intake. My current offy and single quad is set up a bit different and the breather at the rear is fine. I use the fitting at the rear of the intake below the carb as my vacuum and trani set-up.