The Ford Barn - View Single Post

ryanheacox · 01-07-2020, 07:41 AM

It was pitted in the areas of the needle bearings, looked okay in the space in between. It was an original Ford part. Giving it some more thought, I should just change the bearings. The kit is $15 for the bearings and seal. I have a soft spot for Torrington bearings since they were made in the area but I'm sure the right thing is to change the bearings.

That being said, what is the easiest way to get them out?

01-07-2020, 07:41 AM	#3
ryanheacox Senior Member Join Date: Apr 2013 Location: Northwest CT Posts: 1,092	Re: Remove sector needle bearings It was pitted in the areas of the needle bearings, looked okay in the space in between. It was an original Ford part. Giving it some more thought, I should just change the bearings. The kit is $15 for the bearings and seal. I have a soft spot for Torrington bearings since they were made in the area but I'm sure the right thing is to change the bearings. That being said, what is the easiest way to get them out?