|
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Re: flywheel housing shims? late production diamond block.
9:00, and 3:00 should read alike.
12:00 and 6:00 should read a like.
All 4 points have to be a like.
This is all accomplished, with shims on the two top bolt holes.
Set 9 & 3 first, and 12 & 6 next.
Shim amounts on both sides will likely, not be the same, but all for points will be square, and that is what your after.
You also should be using shim thickness, as littled as .001, to .002 thousandths.
Herm.
|