The Ford Barn - View Single Post

sawbuck · 03-01-2020, 03:00 PM

i used the ground rod to work the bearing . i think i just removed enough of the bearing edge to fit the stock push rod ...like i said it was not much just enough to stop the rod from hitting the lobe ...running now and pumping fuel...thanks for all the advice !!

03-01-2020, 03:00 PM	#22
sawbuck Junior Member Join Date: May 2010 Location: conn Posts: 24	Re: flathead fuel pump push rod i used the ground rod to work the bearing . i think i just removed enough of the bearing edge to fit the stock push rod ...like i said it was not much just enough to stop the rod from hitting the lobe ...running now and pumping fuel...thanks for all the advice !!