The Ford Barn - View Single Post

glennpm · 11-01-2019, 11:41 AM

The taper for the rod end may be wrong too. There is a drill or reamer that will put a taper in from the opposite side, half way through the Pitman arm hole.

11-01-2019, 11:41 AM	#102
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: 36 Ford drag link orientation question The taper for the rod end may be wrong too. There is a drill or reamer that will put a taper in from the opposite side, half way through the Pitman arm hole.