View Single Post
Old 09-11-2018, 10:47 PM   #4
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 4,286
Default Re: Front inner race turns on hub

IMHO, I think aluminium foil will only be a temporary fix. Aluminium is soft and I suspect it will "flog out". I like the centre punch idea better. If you end up using loctite, take it apart and clean the syrfaces well (I use wax and grease remover from when I paint). One drop of #290, which is applied AFTER assembly is all it will take.
__________________
Nobody told me rigor could start while I'm still alive.
Synchro909 is offline   Reply With Quote