Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Tom Wesenberg
Since you're close to Bert's, that will be a big help for you to get it running. How do you know the switch, coil wire and cap needs to be replaced? I don't replace any GOOD parts. You can start it without the generator, but don't run it very long. Once the generator is belted up it will need to be wired correctly into the charging circuit or it can burn itself up.
|
Hi Tom
I do not have a key for the switch, the coil wire looks a bit strange, like a lamp cord with the ends stripped and I can not get into the distributor cap to clean it. I tried a pencil erasure with no luck. You can bet I will not throw any parts away.
I am very lucky to close to Bert's, Steve and Phill are very helpful, but I don't want to be a constant pain to them.
Thanks Tom