The Ford Barn - View Single Post - Move Pinion forward and back per Les Andrews

redmodelt · 04-17-2018, 05:41 PM

The shims sold by Snyders are for under the bearing on the carrier, at least the ones I have seen in the catalog. The outside diameter would be too small. I have resorted to making my own when shimming the carrier race in the axle housing. You would need to make your own to shim the double race in the housing, it has the same outer diameter as the races in the axle housing.

04-17-2018, 05:41 PM	#36
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Move Pinion forward and back per Les Andrews The shims sold by Snyders are for under the bearing on the carrier, at least the ones I have seen in the catalog. The outside diameter would be too small. I have resorted to making my own when shimming the carrier race in the axle housing. You would need to make your own to shim the double race in the housing, it has the same outer diameter as the races in the axle housing. __________________ I know the voices aren't real but damn they have some good ideas!