Thread: Greasing
View Single Post
Old 09-27-2019, 07:18 AM   #3
deuce5wndw
Senior Member
 
deuce5wndw's Avatar
 
Join Date: May 2010
Location: Liberty, KY
Posts: 311
Default Re: Greasing

No shouldn't have to jack it up. Usually it is because the grease is old and dried up in the fittings. Screw them out and clean them and while you have them out check that the grease hole in the bushing is lined up with the fitting.
deuce5wndw is offline   Reply With Quote