Quote:
Originally Posted by Brace Bailey
Thanks Rex.
I agree. I was thinking I might put a few pop rivets in while I'm lining up the rest of the holes. The new stake pockets and the U-Channel have no holes, so
I've got to drill through the other side to make the holes line up.
Now - if anyone has any advice on how to set the rivets... I don't presently
have any of the concave hammers for my air chisel. I'm researching local Model A'ers....   |
Heat the rivets red hot and insert them doing one at a time and place a heavy weight (bucking bar) against the already formed head and use your rivet gun to form the small side. Good luck !