Quote:
Originally Posted by Russ/40
Are many of you running a Model B distributor, and if so tell of your experience. I'd like to play with one, but can't seem to locate a source for the upper plate. I have a good casting, shaft, and advance assembly. I recall posts on aftermarket choices, but nothing about the B.
|
I am running one and very happy with it. Try Dave Renner at Renner's Corner for parts and rebuilding: (734) 428-8424. Use one of the high quality Model A condenser from Bratton's by elongating the screw hole at the bottom and attaching a pig tail. Site Attached :
Charlie Stephens