The Ford Barn - View Single Post - Relieved stroker motor with Ford aluminum heads

Ron_r1959 · 08-27-2021, 08:24 AM

We have done work with the carbs before and know some of the tricks you are hinting at, I do have a good unrelieved block that we could also use. The past motors were 4-1/8" strokers, this would be the first 4-1/4" motor we have played with.

08-27-2021, 08:24 AM	#3
Ron_r1959 Member Join Date: Aug 2021 Posts: 78	Re: Relieved stroker motor with Ford aluminum heads We have done work with the carbs before and know some of the tricks you are hinting at, I do have a good unrelieved block that we could also use. The past motors were 4-1/8" strokers, this would be the first 4-1/4" motor we have played with.