The Ford Barn - View Single Post

D. Jones · 06-21-2017, 07:25 PM

There is a ton of information on the internet regarding Bork Warner OD transmissions.

I think I read that you tried to remove the solenoid but couldn't, if so try turning it about 1/4 turn clockwise after removing the two screws. Good used working solenoids 6 or 12 volt seem to be hard to find, I've been trying to buy a couple of the 6 volt ones that don't work to see if I can rebuild them but so far I haven't found any for sale.

06-21-2017, 07:25 PM	#5
D. Jones Senior Member Join Date: Jan 2013 Location: Bend, Oregon Posts: 514	Re: 3 speed OD question There is a ton of information on the internet regarding Bork Warner OD transmissions. I think I read that you tried to remove the solenoid but couldn't, if so try turning it about 1/4 turn clockwise after removing the two screws. Good used working solenoids 6 or 12 volt seem to be hard to find, I've been trying to buy a couple of the 6 volt ones that don't work to see if I can rebuild them but so far I haven't found any for sale.