The Ford Barn - View Single Post - The Rear Brake Camshaft Lever...A-2235R-2236L

Steve Plucker · 07-03-2019, 01:00 PM

Got it figured out...First of all there is no left or right rear backing plate; there is no left or right rear brake camshaft; BUT there is a left and right Rear brake Camshaft lever.

One can assemble the three parts, including the dust ring and pin, then the placement of the left and right assembled backing plates can thus be determined which one goes on the right or left side of the rear axle.

Well Duhhhhhhh!

Pluck

07-03-2019, 01:00 PM	#4
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Re: The Rear Brake Camshaft Lever...A-2235R-2236L Got it figured out...First of all there is no left or right rear backing plate; there is no left or right rear brake camshaft; BUT there is a left and right Rear brake Camshaft lever. One can assemble the three parts, including the dust ring and pin, then the placement of the left and right assembled backing plates can thus be determined which one goes on the right or left side of the rear axle. Well Duhhhhhhh! Pluck