The Ford Barn - View Single Post

flatheadmurre · 02-10-2020, 05:23 AM

Isn´t the bellhousing bolted to the tranny with 4 bolts...
Taking a GM aluminum bellhousing and cutting/welding a plate that fits to the tranny wouldn´t be to much of a hassle....
Finding a good B block can´t be that impossible...i´m on the wrong side of the pond and i bet i can by phone get hold of one in MN for you if all other options run dry...

02-10-2020, 05:23 AM	#5
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: B Motor problems Isn´t the bellhousing bolted to the tranny with 4 bolts... Taking a GM aluminum bellhousing and cutting/welding a plate that fits to the tranny wouldn´t be to much of a hassle.... Finding a good B block can´t be that impossible...i´m on the wrong side of the pond and i bet i can by phone get hold of one in MN for you if all other options run dry...