01-31-2018, 08:38 PM
|
#12
|
|
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Body Leaning To One Side
Quote:
Originally Posted by solidaxle
The 2.5 degree aluminum shim is from a off road 4x4 catalog. All I did was trim the sides down to fit up in the narrow cross member. You want to unbolt the spring and make sure the spring center bolt goes through the hole in the shim to hold it in place. It's a temporary fix till I have the frame checked out.
|
That sounds like a good temporary fix. But I'm curious. How did you determine that you needed a 2.5° shim and not a 2° or 3° shim?
|
|
|