The Ford Barn - View Single Post

Milt/Las Vegas · 10-23-2017, 10:40 AM

The upper door w/strip channels mounted on the top irons appear to be too long by an 1/8 of an inch or so and no provision for any kind of a seal.If I elongated the screw holes I might be able to move the channels back enough.I should not have to do either.The forward screw hole in the channels do not have a matching hole in the top iron.

10-23-2017, 10:40 AM	#1
Milt/Las Vegas Senior Member Join Date: May 2010 Location: North Las Vegas,Nv/Rainier,Or Posts: 450	40 conv.w/strip channel The upper door w/strip channels mounted on the top irons appear to be too long by an 1/8 of an inch or so and no provision for any kind of a seal.If I elongated the screw holes I might be able to move the channels back enough.I should not have to do either.The forward screw hole in the channels do not have a matching hole in the top iron. __________________ Milt/Las Vegas