Quote:
Originally Posted by pgerhardt
What brought on the thought was painting my starter, but there are many contact places where a good ground is needed. After reading all the suggestions I have come to the conclusion that there is no easy solution. On my starter I sanded away all the paint on one "ears" and laid a washer over the mounting hole area to keep paint from getting there. I guess that is the approach I'll use. Thanks for all your responses!
BTW NOT using dielectric grease is new to me? What would be a good conductive grease?
|
I ran a extra battery cable from the frame strap bolt to the lower starter bolt hiding it in the frame channel. This removes any questionable transitions like rivet points, bolt points etc. which could be mechanically sound but electrically resistant at high current.