View Single Post
Old 01-13-2018, 09:16 PM   #28
Stage1gs
Member
 
Join Date: Nov 2014
Location: Grant, FL
Posts: 37
Default Re: Interpreting Compression Test Results

The #1 intake valve looks a bit better. You can see where it contacted the seat all the way around the valve. My calipers show the contact line varies from .030 " tp about .050" wide.. I like a wider contact area, but atleast this seat was making some contact all the way around.

As info, i did check the lash before removing the valves. The intake was 13 thou and the exhaust was 15 thou.
Attached Images
File Type: jpg image.jpg (30.7 KB, 55 views)
Stage1gs is offline   Reply With Quote