View Single Post
Old 07-05-2014, 05:37 AM   #27
scooder
Senior Member
 
Join Date: Jul 2010
Posts: 2,593
Default Re: changing plugs every 100 miles!!

With the Navarro racing intake. I ran one on the street, this is what I found works best from cold.
Start the engine, let him run for 2-3 minutes. If it's real cold, you'll see the carbs start to frost. Shut him down. If they were frosty, you'll see them thaw as the engine heat soakes the intake/carbs. Then start him up. And away you go. When doing it this way, the engine ran like a long dog. And would do so for the rest of the day. Only needing the heat soake after a overnight rest.
Bit of a palavar, but work good. Next one will have a heated intake.
Martin.
scooder is offline   Reply With Quote