View Single Post
Old 08-02-2017, 10:49 PM   #14
transbytip
Senior Member
 
Join Date: Dec 2011
Location: ottumwa Ia.
Posts: 102
Default Re: Sequence for tightening of fan belts 8BA

This is my red neck way of tighting the belts a bit cumbersom but it worked for me easier if you have hoist but not ness.get a couple step ladders put one on each side place a long 2by 6 on edge across the apporiate steps vice grip the board so it stays on edge , now place a ratchet strap under front of gen.over the board hook strap ends together&start ratcheting or if you have car on hoist just lower hoist untill proper tension on belt, It worked for me Cliff
transbytip is offline   Reply With Quote