The Ford Barn - View Single Post

George Miller · 02-13-2015, 10:28 AM

If you want to replace the rope seal, you do not have to take the pulley off.
Just take the cam gear cover off ( place a jack under the oil pan, use a board between jack and pan). Then put it back on. Then put the front motor mount back on. Then take the oil pan off and replace that rope seal.

02-13-2015, 10:28 AM	#5
George Miller Senior Member Join Date: May 2010 Location: NC Posts: 2,975	Re: How to support engine If you want to replace the rope seal, you do not have to take the pulley off. Just take the cam gear cover off ( place a jack under the oil pan, use a board between jack and pan). Then put it back on. Then put the front motor mount back on. Then take the oil pan off and replace that rope seal.