Thread: wheel bearing
View Single Post
Old 05-27-2010, 05:56 PM   #2
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 5,214
Default Re: wheel bearing

The bearing should be able to turn on the axle.
The inner "seals" can get worn from the bearing adjustment being too loose.

The inner race should fit to the spindle with very little play, usually there is an unworn area where the race doesn't touch that can be used for comparison to determine how worn the spindle is.

The race in the drum should not turn or wiggle, they are a press fit.
Kurt in NJ is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)