The Ford Barn - View Single Post

dmsfrr · 10-24-2021, 10:33 PM

If it's on jackstands and the A-arms are hanging in the air at full drop... getting the sway bar hardware to line up can be tough. (as you've discovered)

It should be much easier to install if you can use drive-on ramps under the front of the car,
with the suspension at 'normal ride height' or as close as possible.
.

10-24-2021, 10:33 PM	#5
dmsfrr Senior Member Join Date: Aug 2012 Location: Abq, NM Posts: 3,607	Re: front 57 wagon sway bar install If it's on jackstands and the A-arms are hanging in the air at full drop... getting the sway bar hardware to line up can be tough. (as you've discovered) It should be much easier to install if you can use drive-on ramps under the front of the car, with the suspension at 'normal ride height' or as close as possible. . Last edited by dmsfrr; 10-24-2021 at 11:04 PM.