The Ford Barn - View Single Post - Newby with a question

Ruth · 02-12-2019, 09:41 PM

I can't see moving the wishbone ball down will help that much in adjusting caster. In my (very rough) calculations the ball would have to be moved ~1" for every 1° change in caster realized at the spindles.

The OP states he has negative caster? If that is the case he would need to drop the wishbone ball almost 5". Sounds to me like he has some (un)bending to do.

02-12-2019, 09:41 PM	#15
Ruth Senior Member Join Date: May 2016 Location: Glide, Oregon Posts: 1,339	Re: Newby with a question - Castor angle I can't see moving the wishbone ball down will help that much in adjusting caster. In my (very rough) calculations the ball would have to be moved ~1" for every 1° change in caster realized at the spindles. The OP states he has negative caster? If that is the case he would need to drop the wishbone ball almost 5". Sounds to me like he has some (un)bending to do.