The Ford Barn - View Single Post - 37 V8

Jack E/NJ · 02-07-2019, 06:07 PM

supereal>>> secure them with a hose clamp placed around the hose just over the stat>>>

Old Henry>>>hold the stat in place is put a hose clamp above it and crank it down>>>

TonyM>>> I think some one on FordBarn suggested using a second clamp to hold the thermostat in place. This is what I did. No more problem.>>>

mit31>>>The only thing I can think of is a hose clamp above the stat>>>

8^) Jack E/NJ

02-07-2019, 06:07 PM	#28
Jack E/NJ Senior Member Join Date: May 2010 Posts: 2,173	Re: 37 V8 - Thermostat anchor?? supereal>>> secure them with a hose clamp placed around the hose just over the stat>>> Old Henry>>>hold the stat in place is put a hose clamp above it and crank it down>>> TonyM>>> I think some one on FordBarn suggested using a second clamp to hold the thermostat in place. This is what I did. No more problem.>>> mit31>>>The only thing I can think of is a hose clamp above the stat>>> 8^) Jack E/NJ