The Ford Barn - View Single Post

glennpm · 12-11-2017, 07:08 PM

Hi Gordon,

Look at the gears in post #17. The cam turns 1/2 a revolution for a complete 360 degree revolution of the crank gear. In the picture above assume the crank gear is as shown. A full turn of the crank gear would yield the cam gear with dot 180 degrees out or on top in this picture. Is that what you are seeing?

12-11-2017, 07:08 PM	#24
glennpm Senior Member Join Date: Sep 2014 Location: Wiscasset, Maine Posts: 1,981	Re: Rebuilt Flathead Problems. Hi Gordon, Look at the gears in post #17. The cam turns 1/2 a revolution for a complete 360 degree revolution of the crank gear. In the picture above assume the crank gear is as shown. A full turn of the crank gear would yield the cam gear with dot 180 degrees out or on top in this picture. Is that what you are seeing?