View Single Post
Old 04-16-2018, 08:59 AM   #26
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Move Pinion forward and back per Les Andrews

Sponsored Links (Register now to hide all advertisements)
I put the shim under the cup in the housing because we have the tool to remove it and because so many carriers are marginal re fit of bearing in the first place. I have found that we having more carriers with spun or close to spun bearings so do not want to be pulling the tapered bearing on and off any more then necessary. While there are maybe a lot of carriers out there, does not mean that they are usable. If the spider gear wear area is bad or the bearing just drops on they are toast. Sometimes they can be saved, but not all the time.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote