Quote:
Originally Posted by Bud Man
Visually checked the 30 Amp starter use, looked good, so I ruled that out. After all the helpful replies, decided to replace it anyway...yep, you guessed it - fuse had burnt away from the end contact - couldn't see if it was blown.
Gosh, I'm a knucklehead..... thanks all!
|
I had the same thing happen on my 48. Replace the whole turn signal switch because I could not get it to work, even checked the fuse with a meter and check good. After all that work, was standing in the sun light and as I turned the fuse end for end, there was a bead of solder rolling back and forth. That bead must have closed the gap when I check it.