The Ford Barn - View Single Post

alanwoodieman · 10-07-2018, 08:12 AM

I use an air hammer with a bit ground down to just below the pin diameter. I pad the body with tape and hold the hammer with a gloved hand, start off with about 30 lbs but go up if nothing moves. this only works if you have the running boards off. the top of the pin has the serrations that hold the pin in, but obviously rust is a big factor.

10-07-2018, 08:12 AM	#3
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,964	Re: 36 Fordor Door Pin Removal I use an air hammer with a bit ground down to just below the pin diameter. I pad the body with tape and hold the hammer with a gloved hand, start off with about 30 lbs but go up if nothing moves. this only works if you have the running boards off. the top of the pin has the serrations that hold the pin in, but obviously rust is a big factor.