Thread: B Camshaft
View Single Post
Old 02-27-2017, 12:29 PM   #5
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 2,299
Default Re: B Camshaft

1.120" will work fine with the A or B cam. FYI, there were 3 different B cams produced. Most had .302" cam lift. A few had .315" cam lift and some .339". The last was the best performer, but all were an improvement over the A cam.
Jim Brierley is offline   Reply With Quote