The Ford Barn - View Single Post - Newbie Question

Tom Wesenberg · 11-25-2017, 09:38 PM

Just remove the pin from the clutch adjusting rod, then turn the rod to take up the freeplay. You need about 3/4" pedal movement before the bearing touches the 6 fingers on the pressure plate.

11-25-2017, 09:38 PM	#35
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Newbie Question - Shifting suddenly difficult ! Just remove the pin from the clutch adjusting rod, then turn the rod to take up the freeplay. You need about 3/4" pedal movement before the bearing touches the 6 fingers on the pressure plate.