The Ford Barn - View Single Post - Newbie Question

mike657894 · 11-25-2017, 10:57 AM

On my car the floor boards are not screwed down. Which makes it really easy to check the trans oil. Mine was a inch low. The gears take up most of the space in that section so it was just a cup low. my plug was stuck a bit. Hitting a dead blow mallet into a crescent wrench can take the strain out of a stuck plug. I have the screw kits in new bags. And when my car gets back together I will probably screw the front board down fully and just put two in the larger floor board.

11-25-2017, 10:57 AM	#29
mike657894 Senior Member Join Date: Oct 2015 Location: Bay City Michigan Posts: 1,050	Re: Newbie Question - Shifting suddenly difficult ! On my car the floor boards are not screwed down. Which makes it really easy to check the trans oil. Mine was a inch low. The gears take up most of the space in that section so it was just a cup low. my plug was stuck a bit. Hitting a dead blow mallet into a crescent wrench can take the strain out of a stuck plug. I have the screw kits in new bags. And when my car gets back together I will probably screw the front board down fully and just put two in the larger floor board.